• Nederlands
  • English
  • Deutsch

Single-embossed pillowplate

Perfectly suitable for tank construction

Single-embossed pillowplate

In the case of single-embossed pillowplate, after the inflation, one side of the plates welded to each other remains completely flat. The flat side is suitable for hygienic surfaces on the inside of a tank. An additional benefit is that that the inside of the tank no longer has to be finished (ground).

Unique technical development
When welding, we mainly use laser welding technology that has been further developed in-company. When using this technology for the single-embossed pillowplate, one side remains completely flat and, even with relatively thin materials, the pillowplate is able to withstand high operating pressures.

Your product with optimal heat transfer
Single-embossed pillowplates are extremely suitable as a tank wall for cooling- or heating tanks for the food industry. These pillowplates are able to withstand extremely high operating pressures. Moreover, our design flexibility in combination with our experience in the field of heat transfer in pillowplates guarantee a product with optimal heat transfer.

Many uses
The single-embossed pillowplates are extensively used as a heat exchanger in tank construction for the food- and processing industries. The single-embossed pillowplates are suitable for heating and cooling using a very wide range of cooling and heating agents such as water, steam, glycol and thermal oil.

Fast delivery time
Our extensive stock of basic materials enables Daussiny to offer extremely fast delivery times (after 7 working days.)

Specifications
Single-embossed pillowplates are available in various materials. The most common materials are RVS304L and RVS316L and Daussiny has a large stock of these materials in various thicknesses.

Daussiny Laser Welding usually has baseplates in thicknesses of 3, 4, 5 and 6mm to 10,000×2,000mm in stock.

Moreover, Daussiny Laser Welding also has pillowplates at lengths of 8,000mm in stock in various materials, widths and thicknesses.

Generally, Daussiny has materials for the baseplates in stock in thicknesses from 2.5 to 20mm. Download the complete list of dimensions of the present stock here:

 

In addition to the standard materials, Daussiny Laser Welding can produce the single-embossed pillowplates in various other materials, such as RVS316TI and Duplex.

Uses
Single-embossed pillowplates are mainly used in the following industries:

– food industry
– tank construction
– processing industry
– chemical industry

Single-embossed pillowplates can also be deployed for numerous general uses that require cooling or heating.

Stock and delivery time
Our extensive stock of basic materials enables Daussiny to offer extremely fast delivery times (after 7 working days.) Send a request by e-mail or enquire about the various options via the website.

Tank single embossed

Single embossed

Technical questions or an offer?

Do you have a technical question about the materials, sheet thicknesses or the correct welding pattern, or would you like to receive an offer? Then contact us by phone (during office hours) +31 (0)53 203 0670 or send us an e-mail. Daussiny Laser Welding offers you the best and most economical solution.