• Nederlands
  • English
  • Deutsch

Falling Film water chiller

From modular (easy to use and fast delivery) to customised solutions.

Falling Film water chiller
The Falling Film water chiller by Daussiny Laser Welding provides extremely efficient cooling via a plate pack of double-embossed pillowplates that a thin layer of water flows over. A major benefit of this use is that a large amount of liquid can be cooled relatively quickly to 0.5°C.

Modular, simple and fast delivery
Daussiny Laser Welding has developed a standard Falling Film water chiller with a unique modular design. This falling film water chiller has a standard housing in which a different number of plates can be installed according to the different uses and capacities. The unique modular construction enables Daussiny Laser Welding to supply these Falling Film water chillers at an extremely fast delivery time and a high level of user-friendliness.

Falling Film water chillers can be supplied for flooded and pump systems. For Freon, these are also available as a DX (direct evaporation) system. Upon request, the Falling Film water chillers can be supplied with plastic or stainless steel water container with hot/cold section. The water containers have 80mm of insulation and the exterior is finished with 1mm stainless steel plating.

Download the product data sheet for the Falling Film water chiller with modular construction here:


Customisation is always possible
In addition to the modular Falling Film water chiller, Daussiny Laser Welding can also offer custom-made solutions.

The Falling Film water chillers from Daussiny Laser Welding are suitable for different coolants, such as NH3, R404A, R507, R134A, R22, Glycol, Freon, etc. The coolants can be inserted with a pump, but also by means of natural flow. For Freon, a DX (direct evaporation) system is possible.

The double-embossed pillowplates are mainly manufactured from RVS304L and RVS316L, but can also be manufactured from SMO254 for special uses such as, for example, seawater. The temperature of the cooled water is 1°C or 0.5°C and the Falling Film water chiller can be equipped with a hot/cold section for recirculation.

The Falling Film water chiller is often used:

– for expanding the capacity of the Ice Bench (‘IJsbank’)
– in the food industry
– in industrial bakeries
– in the dairy industry
– for general cooling

Stock and delivery time
Depending on the version, the average delivery time for a Falling Film water chiller is 6-8 working weeks. Send a request by e-mail or enquire about the options via the website.

Falling film modular design

Falling Film custom-made

Technical questions or an offer?

Do you have a technical question about the materials, sheet thicknesses or the correct welding pattern, or would you like to receive an offer? Then contact us by phone (during office hours) +31 (0)53 203 0670 or send us an e-mail. Daussiny Laser Welding offers you the best and most economical solution.